Lab: Xv6 and Unix utilities

This lab will familiarize you with xv6 and its system calls.

Boot xv6

Have a look at the lab tools page for information about how to set up your computer to run these labs.

Fetch the git repository for the xv6 source for the lab:

$ git clone git://g.csail.mit.edu/xv6-labs-2024
Cloning into 'xv6-labs-2024'...
...
$ cd xv6-labs-2024

The files you will need for this and subsequent labs are distributed using the Git version control system. For each of the labs you will check out a version of xv6 tailored for that lab. To learn more about Git, take a look at the Git user's manual, or this CS-oriented overview of Git. Git allows you to keep track of the changes you make to the code. For example, if you are finished with one of the exercises, and want to checkpoint your progress, you can commit your changes by running:

$ git commit -am 'my solution for util lab exercise 1'
Created commit 60d2135: my solution for util lab exercise 1
 1 files changed, 1 insertions(+), 0 deletions(-)
$

You can view your changes with git diff, which displays changes since your last commit. git diff origin/util displays changes relative to the initial util code. origin/util is the name of the git branch for this lab.

Build and run xv6:

$ make qemu
riscv64-unknown-elf-gcc    -c -o kernel/entry.o kernel/entry.S
riscv64-unknown-elf-gcc -Wall -Werror -O -fno-omit-frame-pointer -ggdb -DSOL_UTIL -MD -mcmodel=medany -ffreestanding -fno-common -nostdlib -mno-relax -I. -fno-stack-protector -fno-pie -no-pie   -c -o kernel/start.o kernel/start.c
...
riscv64-unknown-elf-ld -z max-page-size=4096 -N -e main -Ttext 0 -o user/_zombie user/zombie.o user/ulib.o user/usys.o user/printf.o user/umalloc.o
riscv64-unknown-elf-objdump -S user/_zombie > user/zombie.asm
riscv64-unknown-elf-objdump -t user/_zombie | sed '1,/SYMBOL TABLE/d; s/ .* / /; /^$/d' > user/zombie.sym
mkfs/mkfs fs.img README  user/xargstest.sh user/_cat user/_echo user/_forktest user/_grep user/_init user/_kill user/_ln user/_ls user/_mkdir user/_rm user/_sh user/_stressfs user/_usertests user/_grind user/_wc user/_zombie
nmeta 46 (boot, super, log blocks 30 inode blocks 13, bitmap blocks 1) blocks 954 total 1000
balloc: first 591 blocks have been allocated
balloc: write bitmap block at sector 45
qemu-system-riscv64 -machine virt -bios none -kernel kernel/kernel -m 128M -smp 3 -nographic -drive file=fs.img,if=none,format=raw,id=x0 -device virtio-blk-device,drive=x0,bus=virtio-mmio-bus.0

xv6 kernel is booting

hart 2 starting
hart 1 starting
init: starting sh
$

If you type ls at the prompt, you should see output similar to the following:

$ ls
.              1 1 1024
..             1 1 1024
README         2 2 2227
xargstest.sh   2 3 93
cat            2 4 32864
echo           2 5 31720
forktest       2 6 15856
grep           2 7 36240
init           2 8 32216
kill           2 9 31680
ln             2 10 31504
ls             2 11 34808
mkdir          2 12 31736
rm             2 13 31720
sh             2 14 54168
stressfs       2 15 32608
usertests      2 16 178800
grind          2 17 47528
wc             2 18 33816
zombie         2 19 31080
console        3 20 0
These are the files that mkfs includes in the initial file system; most are programs you can run. You just ran one of them: ls.

xv6 has no ps command, but, if you type Ctrl-p, the kernel will print information about each process. If you try it now, you'll see two lines: one for init, and one for sh.

To quit qemu type: Ctrl-a x (press Ctrl and a at the same time, followed by x).

sleep

Implement a user-level sleep program for xv6, along the lines of the UNIX sleep command. Your sleep should pause for a user-specified number of ticks. A tick is a notion of time defined by the xv6 kernel, namely the time between two interrupts from the timer chip. Your solution should be in the file user/sleep.c.

Some hints:

Run the program from the xv6 shell:

      $ make qemu
      ...
      init: starting sh
      $ sleep 10
      (nothing happens for a little while)
      $
    

Your program should pause when run as shown above. Run make grade in your command line (outside of qemu) to see if you pass the sleep tests.

Note that make grade runs all tests, including the ones for the tasks below. If you want to run the grade tests for one task, type:

     $ ./grade-lab-util sleep
   
This will run the grade tests that match "sleep". Or, you can type:
     $ make GRADEFLAGS=sleep grade
   
which does the same.

pingpong

Write a user-level program that uses xv6 system calls to ''ping-pong'' a byte between two processes over a pair of pipes, one for each direction. The parent should send a byte to the child; the child should print "<pid>: received ping", where <pid> is its process ID, write the byte on the pipe to the parent, and exit; the parent should read the byte from the child, print "<pid>: received pong", and exit. Your solution should be in the file user/pingpong.c.

Some hints:

Run the program from the xv6 shell and it should produce the following output:

    $ make qemu
    ...
    init: starting sh
    $ pingpong
    4: received ping
    3: received pong
    $
  

Your program should exchange a byte between two processes and produces output as shown above. Run make grade to check.

primes /

Write a concurrent prime sieve program for xv6 using pipes and the design illustrated in the picture halfway down this page and the surrounding text. This idea is due to Doug McIlroy, inventor of Unix pipes. Your solution should be in the file user/primes.c.

Your goal is to use pipe and fork to set up the pipeline. The first process feeds the numbers 2 through 280 into the pipeline. For each prime number, you will arrange to create one process that reads from its left neighbor over a pipe and writes to its right neighbor over another pipe. Since xv6 has limited number of file descriptors and processes, the first process can stop at 280.

Some hints:

Your solution should implement a pipe-based sieve and produce the following output:

    $ make qemu
    ...
    init: starting sh
    $ primes
    prime 2
    prime 3
    prime 5
    prime 7
    prime 11
    prime 13
    prime 17
    prime 19
    prime 23
    prime 29
    prime 31
    ...
    $
  

find

Write a simple version of the UNIX find program for xv6: find all the files in a directory tree with a specific name. Your solution should be in the file user/find.c.

Some hints:

Your solution should produce the following output (when the file system contains the files b, a/b and a/aa/b):

    $ make qemu
    ...
    init: starting sh
    $ echo > b
    $ mkdir a
    $ echo > a/b
    $ mkdir a/aa
    $ echo > a/aa/b
    $ find . b
    ./b
    ./a/b
    ./a/aa/b
    $
  

Run make grade to see what our tests think.

xargs

Write a simple version of the UNIX xargs program for xv6: its arguments describe a command to run, it reads lines from the standard input, and it runs the command for each line, appending the line to the command's arguments. Your solution should be in the file user/xargs.c.

The following example illustrates xarg's behavior:
    $ echo hello too | xargs echo bye
    bye hello too
    $
  
Note that the command here is "echo bye" and the additional arguments are "hello too", making the command "echo bye hello too", which outputs "bye hello too".

Please note that xargs on UNIX makes an optimization where it will feed more than one argument to the command at a time. We don't expect you to make this optimization. To make xargs on UNIX behave the way we want it to for this lab, please run it with the -n option set to 1. For instance

    $ (echo 1 ; echo 2) | xargs -n 1 echo
    1
    2
    $
  

Some hints:

xargs, find, and grep combine well:

  $ find . b | xargs grep hello
  
will run "grep hello" on each file named b in the directories below ".".

To test your solution for xargs, run the shell script xargstest.sh. Your solution should produce the following output:

  $ make qemu
  ...
  init: starting sh
  $ sh < xargstest.sh
  $ $ $ $ $ $ hello
  hello
  hello
  $ $
  
You may have to go back and fix bugs in your find program. The output has many $ because the xv6 shell doesn't realize it is processing commands from a file instead of from the console, and prints a $ for each command in the file.

Submit the lab

Time spent

Create a new file, time.txt, and put in a single integer, the number of hours you spent on the lab. git add and git commit the file.

Answers

If this lab had questions, write up your answers in answers-*.txt. git add and git commit these files.

Submit

Assignment submissions are handled by Gradescope. You will need an MIT gradescope account. See Piazza for the entry code to join the class. Use this link if you need more help joining.

When you're ready to submit, run make zipball, which will generate lab.zip. Upload this zip file to the corresponding Gradescope assignment.

If you run make zipball and you have either uncomitted changes or untracked files, you will see output similar to the following:

 M hello.c
?? bar.c
?? foo.pyc
Untracked files will not be handed in.  Continue? [y/N]
Inspect the above lines and make sure all files that your lab solution needs are tracked, i.e., not listed in a line that begins with ??. You can cause git to track a new file that you create using git add {filename}.

Optional challenge exercises