- ...kernels.
- A
boot-loader called ``grub'' may be just this, but we haven't tried it
out yet
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
- ...EtherEZ
- You must configure
this card using the card's ezsetup.exe program to set it as follows:
I/O base=280, IRQ=2, RAM Addr=d0000, wait states=no, net connection=1,
rom disabled=yes
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
- ...variable.
- (note that OpenBSD
machines want the exact directory that you are mounting to appear on
the /etc/exports file, or you can put the first directory on that
partition followed by the "-alldirs" flag such that ALL directories in
that partition are exported.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
- ...
- found in sys/xok/sysinfo.h
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
- .../etc/bootptab
- make sure you use the ip address of your nfs
server since DNS is not setup at mount time
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
- ...load.
- Remember that once loaded it
will check in EXODEST/boot/ to see if there's a newer version of the
kernel and automatically load that instead
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.